EP Series Controllers
EP1501 Controller Setup
1.0 Introduction The EP1501 is a cost-effective, dual reader panel for controlling a single opening that is expandable up to eight downstream input or output control modules (ICMs or OCMs) or up to 16 MR51e network-ready door modules (for controlling ...
Mercury EP Controllers - Assign a Static IP Address
Configure the Mercury EP Controller With a Static IP Address Once the controller has been added to Borealis you should configure it with a static IP address. This can be done via the controller's Internal Configuration menu. Important Note: Before ...
EP4502 Controller Setup
1.0 Introduction The EP4502 is a powerful system processor module capable of managing two doors/readers “on board” and hundreds of I/O points via connection to additional door modules or MR16 I/O modules. Based on the intelligent, non-proprietary ...
EP1502 Controller Setup
1.0 Introduction The EP1502 is a powerful system processor module capable of managing two doors/readers “on board” and hundreds of I/O points via connection to additional door modules or MR16 I/O modules. Based on the intelligent, non-proprietary ...