LP Controller Setup
Mercury LP Controllers Overview
Introduction In addition to our own Mercury Powered NXT controllers (NXT-MSC), Keri also offers non-proprietary authentic Mercury Security hardware, which is supported by Doors.NET Professional Edition software. The LP hardware platform consists of ...
LP1501 (S3) Controller Setup Guide
1.0 Introduction This section explains how to setup and configure an LP1501 controller with the Doors.NET software. All LP controllers are pre-configured for use on a network, therefore additional TCP/IP configuration must take place in the field ...
LP1502 (S3) Controller Setup Guide
1.0 Introduction The LP1502 controller is Mercury's next-generation advanced access control platform. They have direct hardware support for 2 openings and can scale to 64 access points. The LP4502 provide a two-door interface with auxiliary I/O, ...
LP4502 (S3) Controller Setup Guide
1.0 Introduction The setup for the LP4502 controller is very similar to the LP1502 and the LP2500. All LP controllers are pre-configured for use on a network, therefore additional TCP/IP configuration must take place in the field prior to placing ...
LP Controller - Full Controller Configuration
LP Series Full Setup and Configuration Guide 1.0 Introduction This section explains how to setup and configure all controller settings and advanced options. All these settings can be found either by logging into the controller via a web browser or by ...