Change the Admin Password Notification

Change the Admin Password Notification

1.0 Introduction

This feature allows the system administrator to control the amount of time between password changes for all users of the system. The default setting is every 90 days for new systems. An upgraded system will be set to Never until the system administrator decides which level is appropriate for their site.

 

Password Change System Options

 

Select a time period

 

 

If the selected time is not the Never selection, the system will check the time of the last password change on every login. A message will be displayed if the last password changes exceeds the value set by the system administrator:

 

Password Change Reminder Message

 

2.0 Change the Operator Password

  1. Click YES to the notification that appears when you log into Doors.NET.
  2. The password change dialog box will appear.
  3. Enter the old (current) admin password.

    Change password

  4. Enter the new password.
  5. Enter the new password a second time, to confirm. The new password cannot be the same as the old password
  6. A password strength indicator will be displayed.

    Enter new password

  7. Factors that increase the strength of the password:
    - High number of characters
    - Uppercase and lowercase letters
    - Letters and numbers
    - Using symbols and special characters

  8. The following notification will appear:

    Password Change Confirm

  9. Click YES to proceed with the password change.
  10. The next time you log into Doors.NET you will need to use the new password.

    • Related Articles

    • Change Operator Password Strength

      1.0 Introduction Effective from Doors.NET v_4.0.2 is it now possible to increase the required strength of the operator passwords. Once set, all operator passwords will be required to meet the minimum password level. Doors.NET has a default password ...

    • Doors.NET Password Recovery Request

      Please submit all password recovery requests via the following web page: https://kerisys.com/password-recovery-request The online request form makes it easier for Keri to keep a record of all password recovery requests – the requested data is easier ...

    • Change the Host PC IP Address

      Often IP devices (such as access control panels, IP cameras and network routers and switches) use either a DHCP (Dynamic Host Configuration Protocol) or they will have a default static IP address. Often the static address is something like: ...

    • Change Card Reader Mode from an Input

      1.0 Introduction A basic Local Linkage example is to program an output on the system to follow an input, so that when the input goes active the output automatically goes active. When the input goes inactive then the output also goes inactive. Prior ...

    • Doors.NET - Admin Client Only Install

      Admin Client Only Installation 1.0 Introduction This section explains how to install just the administrative client onto a PC, such as for installations where multiple client connections are required. Important Note: If the host PC/Application Server ...