LP Series Controllers
Mercury LP Controllers - Assign a Static IP Address
Configure the Mercury LP Controller With a Static IP Address Once the controller has been added to Borealis you should configure it with a static IP address. This can be done via the controller's Internal Configuration menu. Important Note: Before ...
LP1501 Controller Setup
1.0 Introduction The LP1501 is a cost-effective, dual reader panel for controlling a single opening that is expandable up to eight downstream input or output control modules (ICMs or OCMs) or up to 16 MR62e network-ready door modules (for controlling ...
LP4502 Controller Setup
1.0 Introduction The new Authentic Mercury LP Series Intelligent Controllers are Mercury Security’s next generation advanced access control platform that runs on embedded Linux. The enhanced platform offers an improved processor and increased memory, ...
LP1502 Controller Setup
1.0 Introduction The LP1502 is a powerful system processor module capable of managing two doors/readers “on board” and hundreds of I/O points via connection to additional door modules or MR16 I/O modules. Based on the intelligent, non-proprietary ...