Mercury Panel/Module Setup
MR62E Controller Setup
1.0 Introduction The following steps explain how to add an MR62E controller to Borealis. The most important thing to be aware of is the fact that you must first add an LP4502 controller to Borealis before you can add the MR62E. 2.0 Add an LP4502 and ...
MR51E Controller Setup
1.0 Introduction The following steps explain how to add an MR51E controller to Borealis. The most important thing to be aware of is the fact that you must first add an EP4502 controller to Borealis before you can add the MR51E. 2.0 Add an EP4502 and ...
MR16OUT Module Setup
1.0 Introduction The Authentic Mercury MR16OUT module enables expansion of Authentic Mercury intelligent controllers by offering 16-general purpose outputs as Form C relay contacts. The MR16OUT also provides individually configurable parameters that ...
MR16IN Module Setup
1.0 Introduction The Authentic Mercury MR16IN module enables expansion of Authentic Mercury intelligent controllers by offering 16-general purpose input circuits and two-programmable relay outputs. Borealis supports the use of Series 2 MR16IN modules ...
MR52 Dual Door Module Setup
1.0 Introduction The MR52 dual door interface panel with on-board flexibility to connect to a wide range of security devices. The MR52 is easy to install and provides the required I/O for interfacing two card readers, eight general-purpose input ...
MR50 Single Door Module Setup
1.0 Introduction The MR50 Series 3 is an enhanced SIO single card reader interface panel dedicated to individual door oversight and provides all the I/O needed for controlling a single door. Each MR50 connects one card reader, two general-purpose ...