Mercury Module Setup
Single Door Module (SDM) MR51 Setup
Single Door Module (SCP-SDM) Setup in Doors.NET The SCP-SDM (Single Door Module) has all the I/O needed for controlling a single door. Each SDM will interface one card reader, two general purpose input monitor points and two control relays to provide ...
Dual Door Module (DDM) MR52 Setup
SCP MR52/DDM Setup Power Supply to the MR52-S3 The MR52-S3 accepts either 12Vdc or 12Vac for power. Locate the power source as closed to the interface as possible. Make power connection with minimum of 18AWG wires. The input voltage is filtered and ...
MR16-OUT - Output Control Module Setup
1.0 Introduction The multi-device MR16OUT interface panel is dedicated to point control and monitoring, providing 16 general-purpose outputs as Form C relay contacts. The MR16OUT also provides individually configurable parameters that can be set for ...
MR16IN - Input Control Module Setup
SCP-MR16IN-S3 (Input Control Module) Setup The Input Control Module (MR16IN-S3) processor provides sensor interface and output controls for security/ access control and other applications. The controller has 16 input channels for supervised contact ...