Mercury Hardware | Application Notes

Application Notes
OSDP Reader Support with Real Mercury Hardware
1.0 Introduction OSDP (Open Supervised Device Protocol) is an access control communication standard developed by the Security Industry Association (SIA) to improve interoperability among access security products and is being endorsed by all leading ...
Mercury - Series 3 Hardware Notification
1.0 Introduction Mercury is updating all their controllers and supporting peripherals with series 3 hardware revisions (the red coloured boards) and will no longer being supplying the series 2 hardware (green coloured boards). However, the series 3 ...
Mercury - EP Series - Full Reference Guide
1.0 Introduction This section explains how to setup and configure all controller settings and advanced options. All these settings can be found either by logging into the controller via a web browser or by accessing the controller's 'internal ...
Mercury - Hardware Overview
1.0 Introduction Doors.NET allows you to configure, command and control the SCP Series access control hardware manufactured by Mercury Security Corporation. The SCP controllers are compatible with magnetic stripe and Wiegand output readers such as ...

Popular Articles
Generic Database Import (Excel Spreadsheet)
1.0 Introduction Doors.NET comes with a generic import utility that can be used to import card data from an Excel (XLS or XLSX) spreadsheet. This is not a licensed feature so it can be used free-of-charge with Doors.NET. 2.0 Configure the Import ...
Cardholder Enrollment - Manual Enrollment
Manual Enrollment in Doors.NET NXT, MS and 26-bit Wiegand credentials can be manually enrolled by entering the card's imprint (the number printed on the outside of the card), MS and Wiegand cards also require a facility code. The manual enrollment ...
Using the pcProxConfig Software
From the Windows start menu, go to All Apps >> RF Ideas >> pcProxConfig.exe The user interface will appear as below. Plug the pcProx Plus USB enrollment reader into an available USB port. The reader will beep once and its LED will be red. Verify ...
PXL-500 Controller Data Sheet
PXL-500 Controller Data Sheet (attached)
NXT 2D/4D Controller Factory Reset
Keri recommends resetting NXT controllers the first time these controllers are powered on. Also, under certain circumstances NXT controllers may need to be reset. Note: Factory resetting a standard NXT controller will restore the controller to a ...

Mercury Hardware | Application Notes | Knowledge Base