System Setup

System Setup

Introduction

This section explains how to setup a new Borealis cloud access control system.
It details the required steps to get your system licensed and up-and-running and how to
add and setup a hub and then how to get a controller online.

Setup Summary

  1. Borealis Client PC/Device Requirements
  2. Setup a New Operator Account
  3. Create an Organization
  4. Create a New System
  5. Setup a New User
  6. Create a New Site
  7. Setup a Hub
  8. Add a Hub
  9. Add a Controller
  10. Add an NXT Exit Reader
  11. Add an NXT 4x4 Module






    • Related Articles

    • Create a New System

      1.0 Introduction Every Borealis installation will require a ‘System’ to initially be added. The system is created and authorized by Keri Systems and you will be added to the system as an operator with full administration rights. Note: Before creating ...

    • Borealis Full Setup Guide

      1.0 Introduction This document aims to guide you step-by-step through setting up a new Borealis system. It explains how to register a new account, create a new system. Add a new site, claim a hub to the site and then add hardware (such as controllers ...

    • dormakaba Switch Tech Setup

      Switch Tech Setup in Borealis Introduction The Switch Tech integration allows you to manage Switch Tech core devices and access rights via the Borealis user interface. The Borealis user interface works with the Best Switch app (for administering the ...

    • New System Flow Diagram (With Organizations)

      New Borealis System Flow Diagram ​

    • Borealis - System Configuration

      Configure The Borealis System This section explains how to configure a new Borealis access control system. It details all the steps that need to be taken to configure the controller, readers and other hardware as well as access control settings, such ...