Doors.NET | I/O Module Setup

I/O Module Setup
NXT 4x4 Module Setup
Basic NXT 4x4 Setup and Configuration 1.0 Using Standard NXT Controllers The NXT 4x4 module is added to standard NXT controllers using Auto-configuration. The 4x4 module is connected to the controller via one of the available RS-485 ports (these are ...
Setup Outputs
The Setup Outputs process allows you to configure the output type and monitoring parameters. 1.0 Via the Outputs tab Under the Hardware Setup tab, Click the Outputs tab. The Selected Hardware tab is then loaded on the ribbon . 2.0 Via the Hardware ...
Basic Input/Output (I/O) Control
Basic Input/Output Control 1.0 Introduction The standard version of Doors.NET provides basic input/output control for general purpose inputs and outputs when using standard NXT, PXL, NXT Mercury-Powered (MSC) or Mercury (SCP) controllers. The ...

Popular Articles
Generic Database Import (Excel Spreadsheet)
1.0 Introduction Doors.NET comes with a generic import utility that can be used to import card data from an Excel (XLS or XLSX) spreadsheet. This is not a licensed feature so it can be used free-of-charge with Doors.NET. 2.0 Configure the Import ...
NXT 2D/4D Fail-Safe Lock Wiring
PXL-500 Controller Wiring Diagram
Cardholder Enrollment - Manual Enrollment
Manual Enrollment in Doors.NET NXT, MS and 26-bit Wiegand credentials can be manually enrolled by entering the card's imprint (the number printed on the outside of the card), MS and Wiegand cards also require a facility code. The manual enrollment ...
Using the pcProxConfig Software
1.0 Writing a Credential Format to the Reader From the Windows start menu, go to All Apps >> RF Ideas >> rf IDEAS Configuration Utility v6.0.9 Accept the terms of the utility license agreement and click the AGREE button. The user interface will ...

Doors.NET | I/O Module Setup | Knowledge Base