Entraguard Controller Mounting Information Documents (attached) Entraguard Titanium Recess Mount Entraguard Titanium Goose Neck Mount Adapter Entraguard Platinum and Silver Recess Mount Entraguard Platinum and Silver Hooded Mount
The AMP chip extraction tool is provided to assist in the removal and replacement of chip carriers used in the Keri Systems’ PXL-500/PXL-510 and EntraGuard Gold controllers. Important Notes: The Entraguard controller MUST be down-powered when ...
As well as detecting the primary controller type, all Entraguard secondary controllers (and PXL secondary controllers) are also detected and added to the system using auto-config. Converted databases will, of course, already have the controllers ...
1.0 Introduction Doors.NET comes with a generic import utility that can be used to import card data from an Excel (XLS or XLSX) spreadsheet. This is not a licensed feature so it can be used free-of-charge with Doors.NET. 2.0 Configure the Import ...
Keri recommends resetting NXT controllers the first time these controllers are powered on. Also, under certain circumstances NXT controllers may need to be reset. Note: Factory resetting a standard NXT controller will restore the controller to a ...
Manual Enrollment in Doors.NET NXT, MS and 26-bit Wiegand credentials can be manually enrolled by entering the card's imprint (the number printed on the outside of the card), MS and Wiegand cards also require a facility code. The manual enrollment ...