Installation and Setup
Adding Non-26-bit Cards
If you do not know the programmed card format One of the main benefits of the USB enrollment reader is to enroll 'unknown formats' - for example Mifare CSN (Card Serial Numbers) - These are usually 32 bits. Note: PXL controllers will only read a ...
Enrolling a Mifare Card in Doors.NET
From within Doors.NET go to Home >> Cardholders. Click the Add button. Enter a first name and last name. Then save . If the USB reader is still plugged into the host PC you should be seeing a USB Enroll button. Verify that Calculate Internal ...
Adding a 26-bit card (Such as an HID iClass Credential)
Connect the USB reader into an available USB port at the workstation (It does not have to be the host workstation, it can be on a remote client). The USB reader will be automatically detected. Log into the Doors.NET software. Go to Home >> ...
Using the pcProxConfig Software
From the Windows start menu, go to All Apps >> RF Ideas >> pcProxConfig.exe The user interface will appear as below. Plug the pcProx Plus USB enrollment reader into an available USB port. The reader will beep once and its LED will be red. Verify ...
Installing the pcProxConfig Software
Note: This product is only supported for use as of Doors.NET version 3.5.1.22 The pcProx configuration software is a third-party utility that allows you to configure the desired credential data output for the reader. The software is quick and easy ...