How Do I Enroll a Cardholder into Doors.NET?
1.0 Introduction
Cardholder enrollment is the process of creating a cardholder record and then assigning one or more credentials to that record using an enrollment procedure. Keri MS, Keri NXT and Wiegand 26-bit credentials can be enrolled using either of the available enrollment methods but note that there are different steps when enrolling custom wiegand formats and MIFARE formats.
2.0 Enrollment Methods
There are multiple methods for enrolling cardholders into the Doors.NET software:
- Manual Enrollment - The card details are manually entered into the software. Cards are enrolled one-at-a-time.
- Presentation Enrollment - The cards are enrolled by presenting the card to a reader designated as an enrollment reader. Cards are enrolled one-at-a-time and the card details are detected automatically (and then displayed on-screen).
- Block Enrollment - Multiple consecutive cards are enrolled in a block. For example; you may have purchased a box of 50 cards and may wish to enroll all the cards at once. You will need to manually enter the card information printed on the outside of the box.
- Live Events Enrollment - You can very quickly enroll a new card using the live events grid. If you generate an access denied event at a reader you can then right-click on the event in live events and then select 'Add Card' to begin the live events enrollment process.
Related Articles
Doors.NET Troubleshooting Guide
The following guide aims to assist you in troubleshooting and identifying some of the issues that may be encountered when setting up and using the Doors.NET software and supported hardware. Where there are multiple possible causes, the suggested ...
Cardholder Enrollment - Manual Enrollment
Manual Enrollment in Doors.NET NXT, MS and 26-bit Wiegand credentials can be manually enrolled by entering the card's imprint (the number printed on the outside of the card), MS and Wiegand cards also require a facility code. The manual enrollment ...
Cardholder Enrollment - Block Enrollment
Introduction Block Enrollment allows an Operator to create a generic set of credentials (using consecutive credential numbers) that can be, in turn, issued on an as-needed basis. Enable the Advanced View feature set to perform Block Enrollment. If ...
Cardholder Enrollment - Presentation Enrollment
1.0 Introduction The Doors.NET software offers presentation enrollment functionality from any reader on the system. Presentation enrollment allows you to enroll a card simply by presenting the card at the reader. The imprint, facility code (where ...
Doors.NET - Quick Start Guide
1.0 Introduction This document covers the basic installation and configuration of Doors.NET with Standard NXT, PXL or NXT Mercury-Powered controller types. It assumes that the computer being used for the Doors.NET installation has a connection to the ...