NXT-MSC Controllers
Configure Door Functionality on an MR16 Module
1.0 Introduction You can configure an MR16IN and an MR16OUT module with input and output door functions. For example; you can program inputs on the MR16IN to function as the door contact and the RTE inputs. You can also configure an MR16OUT output to ...
NXT-MSC - MR16 Module Setup
MR16OUT-S3 Module MR16IN-S3 Module 1.0 Introduction You can add Mercury MR16IN and MR16OUT modules to the RS-485 port of an NXT-MSC controller after configuring the controller port to the Mercury Security protocol. Each MR16IN or MR16OUT module has ...
NXT-MSC Controller Setup
1.0 Introduction The following steps explain how to add an NXT-MSC controller to Borealis. It assumes that you have already followed the steps to add an NXT-MSC site to your system. During the steps to claim the hub you will select the site that the ...
Replace an NXT-MSC Controller
1.0 Introduction The following steps explains the correct method for replacing an NXT-MSC controller. Following these steps exactly ensures that the controllers, reader and access rights settings are retained and will not need to be reprogrammed. ...
Add an NXT Exit Reader
1.0 Introduction When using NXT-MSC controllers you can use NXT Exit readers. An exit reader is wired into the same bus as a standard NXT entry reader (as illustrated), to control entrance and exit through a single door. Although just one door will ...
NXT-MSC Controller Firmware Upgrade
1.0 Introduction The following steps explain how to upgrade the firmware on an NXT-MSC or NXT-MSC controller via the Borealis user interface. 2.0 Check if the Controller Needs a Firmware Upgrade Once you have the controller(s) online, open live ...