Doors.NET | Access Groups | Knowledge Base

Access Groups
PXL Access Rights Limitations
When using PXL controllers there are certain limitations related to the assignment of access groups. A cardholder can have up to 8 access groups assigned as long as no doors exist in more than one group and providing the doors for a particular ...
Edit Access Groups
Access Group Editing 1.0 Introduction Any alterations to existing access groups can be made very quickly and easily on the access groups page. Note: It is not possible to adjust an assigned time schedule for a reader. You must remove the reader and ...
Setup Access Groups
Access Group Setup in Doors.NET 1.0 Introduction Access groups are setup in Doors.NET via Home >> Access Groups. There are two default access groups; Never and Total Access. When a controller is added to the system it's doors are automatically added ...
Assign an Access Group to a Cardholder
1.0 Introduction Once access groups have been setup they can be assigned to cardholders. 2.0 Access Group Assignment Limitations For NXT controllers there is a maximum of 8 access groups per cardholder. For Neutron controllers there is a maximum of 8 ...

Popular Articles
Generic Database Import (Excel Spreadsheet)
1.0 Introduction Doors.NET comes with a generic import utility that can be used to import card data from an Excel (XLS or XLSX) spreadsheet. This is not a licensed feature so it can be used free-of-charge with Doors.NET. 2.0 Configure the Import ...
Cardholder Enrollment - Manual Enrollment
Manual Enrollment in Doors.NET NXT, MS and 26-bit Wiegand credentials can be manually enrolled by entering the card's imprint (the number printed on the outside of the card), MS and Wiegand cards also require a facility code. The manual enrollment ...
Using the pcProxConfig Software
From the Windows start menu, go to All Apps >> RF Ideas >> pcProxConfig.exe The user interface will appear as below. Plug the pcProx Plus USB enrollment reader into an available USB port. The reader will beep once and its LED will be red. Verify ...
PXL-500 Controller Data Sheet
PXL-500 Controller Data Sheet (attached)
NXT 2D/4D Controller Factory Reset
Keri recommends resetting NXT controllers the first time these controllers are powered on. Also, under certain circumstances NXT controllers may need to be reset. Note: Factory resetting a standard NXT controller will restore the controller to a ...

Access Groups