Allegion - For Installers
Allegion NDE and LE Lock Integration - Full Reference Guide
1.0 Introduction Keri can integrate with the Allegion LE and NDE wireless locks using Schlage Control™ technology. Installation and lock configuration is extremely simple and easy using the Allegion ENGAGE app and the setup in the Doors.NET software ...
Schlage Utility Software (SUS) User Guide
1.0 Introduction The Schlage Utility Software (SUS) mobile app for Android devices is designed specifically for use with the SUS-A cable to set up and act as the link between access control software and select Schlage® electronic locks and ...
De-linking from IP Gateway to connect to ENGAGE mobile app
If a direct mobile app connection to a device is required, it is necessary to de-link the device from the Gateway before a mobile app connection to the device can be established. You will have 30 seconds after de-linking to connect to the device with ...
Allegion Gateway Setup - IP Mode
1.0 Introduction The Allegion IP Gateway allows you to send immediate updates to your locks following any database change. This eliminates the need to physically go to the locks to update them with new cardholder information. As well as immediate ...
Allegion Wi-Fi Direct Setup Guide
1.0 Introduction Allegion locks have built-in Wi-Fi so they can be connected directly to an existing Wi-Fi network (enabling automatic updates of lock configuration and user access). Notes: Supported on the Schlage NDE and LE Locks. The Allegion ...
Capture Locks in the Allegion ENGAGE App
To manage your locks in the Keri Web Portal and mobile app you should now use the Allegion ENGAGE app to capture the locks. Note: If you are adding multiple locks of the same type and within close range, it is advisable that you know the serial ...
Allegion NDE and LE Lock Integration - Quick Start Guide
1.0 Introduction This quick start guide walks you through the process of setting up the Doors.NET integration between the Allegion Gateway and the Allegion NDE and LE locks. It assumes you have an existing Allegion ENGAGE 'Third-Party' account type ...
AD Locks and Local Linkage Setup Guide
1.0 Introduction The Allegion AD Series locks can be integrated with the Local Linkage feature to provide enhanced functionality and monitoring. Note: Both the AD-300 and AD-400 locks can be used with Local Linkage. 2.0 Ensure Advanced Local Linkage ...
Allegion - AD Series Lock Functions
There are several lock modes that are supported by the AD Series locks. You can set one of the supported modes by performing the following: Highlight the AD lock in the hardware tree. Locate the Modes section and view the Extended Feature drop-down ...
AD-400 Lock Setup Guide - Using NXT-MSC Controllers
1.0 Introduction This document explains how to setup and use the Allegion AD-400 wireless locks with the NXT-MSC (Mercury Powered) controllers. The NXT-MSC controller connects to a PIM-400 via an RS-485 connection and the PIM-400 module communicates ...
AD-300 Lock Setup Guide
1.0 Introduction Allegion Schlage AD-300 networked, hardwired locks can be integrated seamlessly with the Doors.NET software when used with the NXT-MSC (Mercury-Powered controllers). You can connect and communicate with up to 32 AD-300s via each the ...