General Hardware Setup
NXT 6RK Reader/Keypad Setup
1.0 Introduction The following document explains how to setup an NXT 6RK keypad in Borealis. The document then goes on to explain some basic reader configuration. The NXT-6RK connects to a Standard NXT, Keri KB or NXT-MSC controller via a Reader ...
OSDP Reader Setup
1.0 Introduction OSDP readers are supported in Borealis when using NXT-MSC or True Mercury controllers. Note: Currently Borealis will support one OSDP reader per controller bus. 2.0 Setup Instructions The following steps explain how to setup an OSDP ...
Configure Door Functions on a 4x4 Module
1.0 Introduction You can configure a 4x4 module with input and output door functions. For example; you can program inputs on the 4x4 to function as the door contact and the RTE inputs. You can also configure a 4x4 output as a lock strike relay. This ...
Reader Settings
1.0 Introduction The following section explains how to modify and use all the reader settings that are supported by NXT and NXT-MSC controllers when using Borealis. 2.0 Reader Settings (NXT Controller) To access the settings of a reader connected to ...
Controller Settings
1.0 Introduction The following section explains how to modify and use all the settings that are supported by NXT and NXT-MSC controllers when using Borealis. 2.0 NXT Controller Settings To access the NXT controller settings: Go to hardware >> ...
Add an NXT 4x4 Module
The NXT 4×4 module is added to the system via the controller section. The NXT 4x4 module is compatible with Standard NXT, Keri KB and NXT-MSC (Mercury-Powered) controllers. Note: - It is not currently possible to link inputs to outputs or re-assign ...
Excluding a Reader From Your Subscription
1.0 Introduction A Borealis system incurs a charge any readers that will be used on the system. By default all of the readers on a controller are set to be included in the subscription (even if there is no reader physically connected to the reader ...
Hardware Status
1.0 Introduction Hardware status allows you to quickly and easily check on the status of a hardware item (such as; a hub, controller, NXT-RIM, NXT readers or NXT 4x4 modules). 2.0 Hub Status From the main menu, click on hubs. A list of all hubs on ...
Add Controllers
Add a New Controller (NXT, KB or NXT-MSC) The process of adding a controller to Borealis is the same regardless of the controller type being installed (the steps apply to both NXT and NXT-MSC controllers). The only difference is that Standard NXT and ...