Local Linkage
Local Linkage Procedure Actions
The table below lists all of the available procedure action item selections. Changing the Action Item Type drop-down selection will change the available Action Item Properties. Action Type Available Selections Access Area Control Areas 0 - 31 ...
Local Linkage - Import and Export
The Linkage Export/Import feature allows you to save Local Linkage actions which can then be imported and used on other controllers (or completely different Doors.NET systems), potentially saving a lot of system programming time. Note: ALL the ...
Keypad User Commands
Keypad user commands can be used as a Local Linkage trigger to activate a specific action such as unlocking doors, activating control points, latching a door, setting a reader mode or locking down an entire facility, for example. A user command is ...
Custom Reader Behavior From RTE
Local Linkage allows you to configure how the reader behaves when an RTE event is generated. Local Linkage provides you with increased flexibility, such as you may want certain doors to not generate an audible alarm at the reader when someone uses ...
Change Card Reader Mode from an Input
1.0 Introduction A basic Local Linkage example is to program an output on the system to follow an input, so that when the input goes active the output automatically goes active. When the input goes inactive then the output also goes inactive. Prior ...
Local Linkage - Program an Output to Follow an Input
1.0 Introduction A basic Local Linkage example is to program an output on the system to follow an input, so that when the input goes active the output automatically goes active. When the input goes inactive then the output also goes inactive. Prior ...
Local Linkage Triggers
The table below lists all of the available trigger conditions. Changing the Source Type drop down selection will change the available Transaction Type selection. Source Type Transaction Type Available Selection Criteria Access Area Access Area Area ...
Local Linkage Data Sheet
Attached.
Local Linkage Overview
The Local Linkage section is by far the most powerful feature of the Doors.NET system. It is an advanced input/output management application that allows you to easily customize the operational mode of the controller to suit individual requirements. ...