Installation and Setup
BioManager Software Download and Installation
1.0 Introduction The BioManager Software is used to communicate to the BioSync fingerprint readers. Once you have connected to the BioSync devices you can configure them, add users, credentials and fingerprints and run basic diagnostic checks. 2.0 ...
BioManager Software Upgrade
1.0 Introduction The following steps explain how to upgrade to a new version of BioManager software. At the time of writing, the current software version is v2.0.0 Notes: To download the new version of BioManager you must have registered an account ...
BioSync KBF-ENR1 Setup Guide
1.0 Introduction The ENR-1 is a desktop card reader with fingerprint reader that allows you to quickly and easily enroll EM and Mifare Card Serial Number (CSN) credentials plus HID 125KHz and Keri NXT 125KHz cards into the BioManager software. It ...
BioSync KBF-3KP Setup Guide
KBF-3KP Fingerprint Reader Setup 1.0 Introduction Setting up a KBF-3KP reader on a new installation is a three step process. Each of these steps is covered in its own document: BioManager Software Installation CNV-1000 Converter Setup - (used to ...
BioSync KBF-2SC Setup Guide
1.0 Introduction Setting up a KBF-2SC reader on a new installation is a three step process. Each of these steps is covered in its own document: BioManager Software Installation (p/n: 02301-001) CNV Converter Setup (p/n: 02303-001) - (used to connect ...
BioSync KBF-2PR Setup Guide
1.0 Introduction Setting up a KBF-2PR reader as a new installation is a three step process. Each of these steps is covered in its own document: BioManager Software Installation (p/n: 02301-001) CNV Converter Setup (p/n: 02303-001) - (used to connect ...
BioSync KBF-1FP Setup Guide
1.0 Introduction Setting up a KBF-1FP reader on a new installation is a three step process. Each of these steps is covered in its own document: BioManager Software Installation (p/n: 02301-001) CNV Converter Setup (p/n: 02303-001) - (used to connect ...
BioSync CNV-1000 Converter Setup Guide
1.0 Introduction The CNV-1000 is an ethernet to RS-485 converter that is required for communication to the BioSync readers/network. The converter is used to scan for and detect the BioSync readers via their serial number/MAC address - so no ...
BioSync B100-KPSA Setup
1.0 Introduction B100-KPSA is an access control fingerprint reader designed for easy management of the users and configuration. The scanner is made with advanced capacitive sensing technology that provides some advantages over optical solutions, such ...
BioSync B100-KP Setup
BioSync B100-KP Reader Setup 1.0 Introduction Setting up a B100-KP reader as a new installation is a three step process. Each of these steps is covered in its own document: BioManager Software Installation CNV-1000 Converter Setup (used to connect to ...
BioSync B100-SC Setup Guide
BioSync B100-SC Reader Setup 1.0 Introduction The B100-SC is a Wiegand biometric and proximity reader for indoor or outdoor access control applications. It has a programmable Wiegand output and offers storage of up to 100 fingerprints. It reads ...
BioSync B100-PR Setup Guide
BioSync B100-PR Reader Setup 1.0 Introduction Setting up a B100-PR reader as a new installation is a three step process. Each of these steps is covered in its own document: BioManager Software Installation CNV-1000 Converter Setup (for connection via ...
BioSync B100-SA Setup Guide
1.0 Introduction Setting up a B100-SA reader as a new installation is a three step process. Each of these steps is covered in its own document: BioManager Software Installation CNV-1000 Converter Setup (for connecting to the BioSync reader via ...
BioSync B100-S Setup Guide
BioSync B100-S Reader Setup 1.0 Introduction Setting up a B100-S reader as a new installation is a three step process. Each of these steps is covered in its own document: BioManager Software Installation CNV-1000 Converter Setup (used to connect to ...