This video explains how to enrol Keri MS series credentials into the Doors.NET software. It covers manual enrolment, block enrolment and presentation enrolment (using one of the readers on the system).
This video provides you with a brief, general overview of the Doors.NET software. The Doors.NET software + TCP/IP NXT hardware solution provides sophisticated access control + video integration - with all the features required to manage a few doors - ...
Importing Cardholder Data from an XLS or XLSX File This is not a licensed feature so it can be used without any additional charge. Setup Procedure Create a folder on the C: drive and copy your XLS or XLSX file into it. Go to the local drive on the ...
Keri recommends resetting NXT controllers the first time these controllers are powered on. Also, under certain circumstances NXT controllers may need to be reset. Note: Factory resetting a standard NXT controller will restore the controller to a ...
1.0 Introduction OSDP (Open Supervised Device Protocol) is an access control communication standard developed by the Security Industry Association (SIA) to improve interoperability among access security products and is being endorsed by all leading ...
Manual Enrollment in Doors.NET NXT, MS and 26-bit Wiegand credentials can be manually enrolled by entering the card's imprint (the number printed on the outside of the card), MS and Wiegand cards also require a facility code. The manual enrollment ...