Entraguard One/One +
EG ONE - Wiring Diagrams (Obsolete)
1.0 Entraguard ONE/ONE+ Connections The antenna must be connected when using the Wi-Fi connection method. The antenna can be easily connected using a flat-head screwdriver to carefully press the connector onto the small round socket located on the ...
EG ONE - Enable Motion Detection (Obsolete)
Motion Detection, when enabled, will instruct the Entraguard app to generate an notification when motion is detected by the on-board camera. When a notification is received you can quickly check the live video feed. The feature is either disabled or ...
EG ONE - Enabling Notifications (Obsolete)
Notifications will bring your attention to the fact that someone is calling you via the call button located on the front of the Entraguard. Or you can receive notifications with the Motion Detection option - when motion is detected by the on-board ...
EG ONE - Change the Unlock Password (Obsolete)
By default you are required to enter a 4-digit password before you can unlock the door. The default unlock password is 1111, but we advise changing it as soon as possible: From the device home screen, swipe-left then press the edit icon. Press ...
EG ONE - Enable One-Key Unlock (Obsolete)
The One-Key Unlock feature gives you the less-secure option of unlocking the door immediately following a single press of the unlock icon. By default you are required to enter an unlock password (default is 1111). From the device home screen, swipe ...
Connecting from Multiple Smart Phones/Tablets
The Entraguard ONE/ONE+ supports up to 4 simultaneous connections. Each connection should be from an app using a unique ID. You should NOT connect to the unit using the same user account on different devices. You should initially add the Entraguard ...
EG ONE - Set the Unlock Time (Obsolete)
The unlock time is configurable from 1 to 100 seconds. The Entraguard unit's unlock time, by default, is set to 1 second. From the device home screen, swipe left, then press the edit icon. Locate the unlock time setting, then press the value it is ...
EG ONE - Change the Unit Password (Obsolete)
The default password for the Entraguard ONE/ONE+ is 1234 so Keri recommends that you change the default password as soon as possible (after adding the device to your app). From the device home screen, swipe left, then press the edit icon. Press ...
EG ONE - Set the Time (Obsolete)
Once you have added the unit you will need to manually set the time. This ensures accurate functionality of features, such as notifications and viewing live video. On the device home screen, swipe left, then press the edit icon. Press the Advanced ...
EG ONE/One+ Setup - Android App (Obsolete)
Setup Procedure Using an Android Device NOTE: When using an Android device, the minimum supported version is 4.2. The Entraguard cannot be used with Android versions older than 4.2. Factory reset the Entraguard and wait at least 2 minutes while the ...
EG ONE/One+ Setup - iOS App (Obsolete)
Setup Procedure Using an iOS Device 1.0 Introduction The Entraguard ONE is an app-based, VOIP Video doorbell/Intercom system design to secure the entrance of a residential or small, commercial building. The ONE units provide video monitoring of a ...
EG ONE App - Create a new User Account (Obsolete)
Setup a New Account Ensure your smart device is connected to your local Wi-Fi network. Open the newly installed Entraguard ONE app. Click the Sign Up button. NOTE: You will only need to add a username and a password for logging in to the app. No ...
EG ONE - Download and Install the iOS App (Obsolete)
The following steps explain how to locate, download and install the iOS Entraguard ONE app. NOTE: Your iOS smart device must be running a minimum of iOS version 8.0. Download the Entraguard ONE App Ensure you have internet connection on your smart ...
EG ONE - Download and Install the Android App (Obsolete)
The following steps explain how to locate, download and install the Android version of the Entraguard ONE app. NOTE: Your Android smart device must be running a minimum of version 4.2. Download the Entraguard ONE App NOTE: Because of the variety of ...
EG ONE/ONE+ Factory Reset (Obsolete)
Here is the procedure for completely resetting the Entraguard ONE/ONE+ to its factory default settings. Power-off the Entraguard unit. Hold down the call button. Apply power, while holding down the button. Continue to hold down the call button for at ...
EG ONE/ONE+ Important Installation Guidelines (Obsolete)
To avoid any potential setup issues, Keri strongly recommends the following checks (prior to setup): Ensure 'Smart Switch' is off (Samsung Android devices) - it can be switched back on once setup is complete. Ensure mobile data 3G/4G is off (all ...
EG ONE/EG ONE+ Data Sheet (Obsolete)
Standalone document attached
EG ONE Setup and User Guide (Obsolete)
Standalone document attached.